How to drive a forklift,There are some tips for your reference:
Practice. Driving a forklift is nothing like driving a car. Forklifts are steered by their rear wheels, have unwieldy weight distribution, and often have counter-intuitive controls. Depending on where you operate, you may need a license or specialized training.
Complete the pre-operations checklist. Look around the vehicle for any damage or malfunction that might prevent the forklift from operating as it is intended. Pay special attention to hydraulic mechanisms and tire conditions. This is very important!
Familiarize yourself with all controls and meter readings. This can be done by reading the operator’s manual.
Note the size and shape of what you are lifting. Some loads may only be safely carried from one side, others may need fork tine “slippers” (extensions) to handle safely.
Make sure the forklift you are using has its tines is set to the proper width. This will depend greatly on the pallets/materials you will be handling.
Lift an object only to the height needed to move it, so as to balance the weight. Always drive with back tilt or mast vertical.
Observe your working environment, make sure it’s clean and clear of obstacles. Drive in reverse if your view is obstructed or use a spotter if necessary.
Start the forklift using the key and/or start button. Move it through basic operations. There will be knobs and levers that move the forks up and down, steer the vehicle and control the speed.
Practice driving the forklift in an open area. Try lifting empty pallets or bags of sand to get used to the controls. Once you are comfortable, you can begin your intended chore.
Leave A Comment